Blast lights

12V/24V

Airblast Blast Lights are developed to meet the demand for an easy to use, lightweight, low voltage grit blasting light.

View data sheet

More than 50 years of experience
Airblast offices in 12 countries

Features

Highly concentrated output of light, the unit fully illuminates the area on which blasting is taking
ABKR also available with LED bulb 4 Watt, 230
Safe to use – works off 12 volts and there’s no glass to A cheap, strong and easily replaceable plastic lens is used at the front of the unit.
No light spill or dazzle – by using a special bulb and tube fitting, the light is concentrated only on the work area and all back dazzle is eliminated.
Free to work – because the unit is clamped directly on the blast nozzle fitting, the operator has both hands free to operate the blast equipment.
The blast light can be used alongside all existing deadman

To back up the light, a suitable fully rubber housed transformer is available to connect to a 220 volt 50 Hz line, giving a 12 volt output to upto 4 separate sockets for up to 4 lights. Other executions are available on request.

Blast light ABKR

Part no.	Description
5010800	ABKR-12/20 Blast Light 12 Volt/20 Watt incl. 12 Volt halo bulb, 5 m cable (2 x 0.75 mm²) and CEE-Connector (Male).
5010100	ABKR-24/20 Blast Light 24 Volt/20 Watt incl. 24 Volt halo bulb, 5 m cable (2 x 0.75 mm²) and CEE-Connector (Male).
5016000	ABKR-12/4 Blast Light 12 Volt/4 Watt incl. 12 Volt LED bulb, 5 m cable (2 x 0.75 mm²) and CEE-Connector (Male).

Spare parts for ABKR-12/2 and ABKR-24/20

Item	Part no.	Description	Item	Part no.	Description
1	5010700	Halogen bulb 12 Volt / 20 Watt		5012000	Cable (2 x 1.50 mm²), neoprene, NWPK H07RN-F
	5010200	Halogen bulb 24 Volt / 20 Watt	5	5012100	Fitting
	5016500	LED bulb 12 Volt / 4 Watt	6	5012200	Spring clip
2	5010300	Lens	7	5012300	Cable connector
3	5010400	CEE Connector, 2 poles, 16A (Male)	8	5012400	Rubber plug
4	5009500	Cable (2 x 0.75 mm²), black rubber, RWPK H05RN-F	9	5012500	Clamp
	5010500	Cable (2 x 1.50 mm²), black rubber, RWPK H05RN-F	10	5012600	Bolt (not shown)

Blast light HALO

Part no.	Description
5011000	HALO-24/100 BLAST LIGHT 24 Volt / 100 Watt with ON/OFF-Switch, Full Rubber housing with reflector. Incl. halogen bulb, 5 m cable (2 x 1.5 mm²) and CEE Connector (M) * Also available in 12 Volt and 42 Volt execution.
5020000	HALO-24/100 BLAST LIGHT 24 Volt / 100 Watt. Full Rubber housing with reflector. Incl. halogen bulb, 5 m cable (2 x 1.5 mm²) and CEE Connector (M).

Spare parts for HALO-24/100

Item	Part no.	Description	Item	Part no.	Description
1	5011100	Bulb 24 Volt / 100 Watt	3	5012000	Cable (2 x 1.50 mm²), neoprene, NWPK H07RN-F
2	5010400	CEE Connector 24V / 16A (M)		5013000	Cable (2 x 2.50 mm²), neoprene, NWPK H07RN-F
			4	5012700	Rubber plug

Transformers

Transformers for 24V blast and flood lights

Incl. 3 m (2 x 1.5 mm2) Grounded cable and 24 Volt 16A CEE Output (Female) – Full rubber housing. Thermal Safeguard against overload.

Part no.	Description
5011500	TRANS MINI – 220V / 24V 120VA – 1 x 24 Volt / 16A CEE output (F)
5011600	TRANS-MIDI – 220V / 24V 225VA – 2 x 24 Volt / 16A CEE-output (F)
5030100	TRANS I/1 – 220V / 24V 500VA – 1 x 24 Volt / 16A CEE output (F)
5030200	TRANS I/2 – 220V / 24V 500VA – 2 x 24 Volt / 16A CEE output (F)
5030300	TRANS I/3 – 220V / 24V 500VA – 3 x 24 Volt / 16A CEE output (F)
5030400	TRANS I/4 – 220V / 24V 500VA – 4 x 24 Volt / 16A CEE output (F)
5030500	TRANS II/2 – 220V / 24V 1000VA – 2 x 24 Volt / 16A CEE output (F)
5030600	TRANS II/3 – 220V / 24V 1000VA – 3 x 24 Volt / 16A CEE output (F)
5030700	TRANS II/4 – 220V / 24V 1000VA – 4 x 24 Volt / 16A CEE output (F)