Blasting
- Excellent quality at sharp prices
- More than 1.000 tons of abrasives on stock in Holland
- Own production steel shot and grit
Elcometer 122 Testex Replica Tape
E122—-A, E122—-B, E122—-C, E122—-F
The Elcometer 122 Testex® Replica Tape is designed to provide a permanent mould of the surface profile, which can then be measured using the Elcometer 124 Thickness Gauge.
Request a quote
Contact information
Kelvinstraat 8
1704 RS Heerhugowaard
The Netherlands
Do you have questions about how we can help your company? Send us an email and we’ll get in touch shortly.
- More than 50 years of experience
- Airblast offices in 12 countries
Product description
Elcometer 122 Testex® Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile. The profile of the surface can then be measured using the Elcometer 124 Thickness Gauge – see specific product page of the 124 Thickness Gauge.
Elcometer 122 Testex® Replica Tape is available in four profile ranges. It is important that the tape grade chosen is reflective of the profile being measured.
For profiles between 12 & 25µm (0.5 & 1.0mils): Coarse Minus Tape
For profiles between 20 & 64µm (0.8 & 2.5mils): Coarse Tape
For profiles between 38 & 115µm (1.5 & 4.5mils): X-Coarse Tape
For profiles between 116 & 127µm (4.6 & 5.0mils): X-Coarse Plus Tape
There are 50 tests in each Replica Tape roll.
Technical Specifications
See data sheet for full technical specifications
| Model | Profile Range | Profile Range Imperial |
| Elcometer 122 Testex® Replica Tape Coarse Minus | 12 – 25µm | 0.5 – 1.0mils |
| Elcometer 122 Testex® Replica Tape Coarse | 20 – 64μm | 0.8 – 2.5mils |
| Elcometer 122 Testex® Replica Tape X-Coarse | 38 – 115μm | 1.5 – 4.5mils |
| Elcometer 122 Testex® Replica Tape X-Coarse Plus | 116 – 127μm | 4.6 – 5.0mils |
| Part numbers: see data sheet |
