ABDI-1300 Vacuum injection sandblasting cabinet
Vacuum Injection Blast Cabinet
The Airblast Vacuum Injection Cabinets are designed for rust removal, cleaning, slagging, frosting, chipping and polishing. The unit is especially designed for manual blasting of all sorts of smaller items.
The dust filterinstallation is constructed behind the working space and provided with a seperator beforehand. The back- and sidewall and the door of the working area is completely covered with 3mm rubber. The installation is constructed of 3mm steelplate and finished with a coating layer in the colour grey.
Kelvinstraat 8
1704 RS Heerhugowaard
The Netherlands
Do you have questions about how we can help your company? Send us an email and we’ll get in touch shortly.
- More than 50 years of experience
- Airblast offices in 12 countries
Product description
The system is ready to operate and comes complete with:
- revolving door (positioned at the rightside of the cabine) with safety control switch.
- lighting 4×18 Watt.
- 3 perforated grids in working area.
- 1 window exchangeable.
- 1 window securit.
- 2 flexible rubber openings.
- build-in controlpanel with main switch, control safety switches for exhauster and lighting.
- 1 nozzle holder with 8 mm Borium Carbid nozzle.
- blast hose which is guided through the roof of the machine.
- reducing valve (0 – 10 bar) operated by a pilot valve with manometer on the front of the machine.
- pneumatic footpedal.
Dimensions
| Cabinet | Working area | Door | |
| Height | 2400 mm | 1000 mm | 850 mm |
| Width | 1300 mm | 1250 mm | 700 mm |
| Depth | 1700 mm | 1000 mm | |
Operating principle
The abrasive falls into the hopper via the work grating in the working area of the blast cabinet. At the lower end of the hopper, the abrasive falls into the mixing tube, from where it is sucked up through the abrasive hose. The suction force can be adjusted by means of the regulating slide valve. The abrasive hose with abrasive leads to the blast nozzle. A compressed air hose is also connected to the nozzle. The foot pedal is used to apply pressure to the compressed air hose. This creates a vacuum in the abrasive hose, causing the abrasive to be drawn in from the hopper and creating a flow of abrasive. The blasting pressure can be adjusted by means of the pressure reducing valve of the compressed air supply.
Technical specification
Cartridge dustfilter Type PF 2 (build-in type with exhauster on the roof)
| Property | Description |
| Exhaust Capacity | 600 m³/h |
| Motor Output | 0.75 kW |
| Electric Motor | 230/400 V, 3 Phase, 50 Hz |
| Filter Cartridges | 2 pieces |
| Filter Area | 18 m² |
| Filter Material | Polyester fabric |
| Filter Efficiency | 99.9% |
| Max. Dust Emission | > 3 mg/nm³ |
| Dust Collecting Bags | 1 piece |
| Cleaning Method | Continuous by compressed air → max. 5 bar |
| Pulse Time | Adjustable |
