Blasting
- Established for more than 50 years
- Experienced engineers
- Active in 12 countries, 14 offices worldwide
- Excellent quality at sharp prices
- More than 1.000 tons of abrasives on stock in Holland
- Own production steel shot and grit
RC-50-20 Abrasive recycling system
Grit Recycling System
The RC-50-20 is a mobile abrasive recycling machine which can be used inside or outside. Several types of reusable abrasive can be recycled by the RC-50-20, the rate of recycling depends upon the type of abrasive being processed. Garnet can be recycled at a rate of up to 5 tons per hour, Steel Abrasive can be recycled at a rate of up to 12 tons per hour*.
Request a quote
Contact information
Kelvinstraat 8
1704 RS Heerhugowaard
The Netherlands
Do you have questions about how we can help your company? Send us an email and we’ll get in touch shortly.
- More than 50 years of experience
- Airblast offices in 12 countries
Product description
Used abrasive is manually feed into the intake hopper from where it is collected by the bucket elevator and transported up the funnel. At the top of the funnel the abrasive is poured onto the spreading plate which ensures an even, shallow and wide flow down into the cascade cleaner. Inside the cascade cleaner the larger particles are separated into a dust bag, and the smaller particles are extracted by a separate cartridge filter which features solenoid controlled automatic pulse cleaning. Depending upon which abrasive is being recycled the unit can be
adjusted to ensure that the abrasive flow and particle separation are fine tuned to be as effective as possible. The cleaned abrasive is deposited into a hopper ready for reuse.
The unit is manufactured in Europe from 3mm and 5mm steel to the highest quality standards. The motors and gearboxes are sealed and lubricated for life. The unit requires an electrical connection of 400 volts – 50 Hz as well as compressed air.
Dimensions
| Height (in standing position) | 4.000 mm |
| Width | 1.500 mm |
| Depth | 1.800 mm |
| Weight (empty) | 650 kg |
Technical specifications
| Exhaust Capacity | 960 m³/h |
| Static Pressure | 1,200 Pa |
| Motor Power | 0.75 kW |
| Motor Voltage | 400 Volt-50/60 Hz |
| Filter Cartridge | 1 pc. |
| Filter Area | 325 x 15 m² |
| Filter Material | Polyester nonwoven NA 806 |
| Max. Dust Emission | < 1.5 mg/nm³ |
| Dedusting | Automatically by compressed air; max. 6 bar |
| Valves | 1 piece 1½ G |
| Pulse Pressure | ± 5 bar |
| Pulse Cycle Time | Adjustable |
| Exhaust Pulse | 1 cartridge equivalent |
| Noise Level | 78 dBA |
| Dust Extraction | PVC bag |
S-200 HOPPER
Abrasive silo 200 litre. Made from 3 mm sheet steel, reinforced with steel profile and equipped with a grit valve and closing lid.
Eletrical panel
Complete with automatic switch controllers, mainswitch, failure lamp and control buttons.
Delivery includes
E 50 Elevator
| Total Height | 4.000 mm |
| Capacity | 50 liter per minute |
| Motor Power | 0.75 kW |
| Electrical Power | 400 Volt, 50/60 Hz |
Made from 2 and 3 mm sheet steel, reinforced with steel profile. Equipped with a motor, gearbox, dust free rolling element, and an inspection hatch.
K 350 Cascade cleaner
| Height | 650 mm |
| Width | 350 mm |
Made from 3 and 5 mm steel plate. The cleaner is mounted between the elevator and the stock silo.
PF 1-L dustfilter (for cascade cleaner)
Cartridge Filter with automatic continuous solenoids which activate pulse cleaning. Filter installation made from 3 mm steel plate with sleeve profiles and reinforcements.
The filter installation consists of the following components:
- Undercarriage with preseparator and dust silo with rubber plug valve
- Filter cabinet with integrated compressed air filter cartridge and cleaning system
- Fan
